HF30 Series – 3kW HF Wide Band Antenna Matching Transformer
The HF30 Series of antenna matching transformers are solid encapsulated heavy duty units suitable for the most arduous environmental conditions and designed for installation in any orientation.
The transformers are housed in a cast aluminium case, vacuum impregnated with epoxy resin and finished in epoxy paint for added protection. High purity alumina ceramic insulators with arcing horns are fitted as standard. An internal static drain to earth provides additional protection against lightning induced EMF’s.
- Wide band 1.5 to 32 MHz
- 3 kW average, 12kW PEP
- All weather solid encapsulated
- Heavy duty cast aluminium case
For added EMP proof operation, no capacitors are used in the transformer circuit. A wide selection of unbalanced and balanced impedance ratios are available to complement most antenna configurations and enquiries for non-standard arrangements are welcome.
The HF30 is a unit of the highest quality and reliability.
|Frequency:||1.5 - 32 MHz|
|Impedance:||See table above|
|Power:||400 Watt average, 1600 Watt peak|
|Insertion loss:||Less than 0.3 dB|
|VSWR:||Less than 1.2:1 (2 - 30 MHz), Less than 1.3:1 (1.5 - 32 MHz)|
|Balance ratio:||Greater than 26 dB|
|Load VSWR:||2.5:1 max.|
|Coaxial connectors:||'N' type (Others on request)|
|Balance terminals:||Alumina ceramic M6 thread|
|Temperature range:||-40ºC to +55ºC|
|High voltage protection:||Arcing horns and internal static drain (NB No internal capacitors fitted.)|
|Configuration:||Cast aluminium case (LM25). Hermetically sealed. Epoxy paint finish.|
|Shipping dimensions:||220 x 150 x 120 mm approx.|
Balance Impedance (ohm)
|Unbalanced impedance (ohm)||50||75||100||200||300||450||600|